Decoding: Difference between revisions

From Lockwiki
Jump to navigationJump to search
mNo edit summary
mNo edit summary
(4 intermediate revisions by the same user not shown)
Line 1: Line 1:
= Decoding =                                                                                                                                                               
= Decoding =                                                                                                                                                               


'''Decoding''' is the process of determining the correct position of components in a [[Lock|lock]] through manipulation, disassembly, measurement, and observation of [[Key|keys]] or lock components. While it does not necessarily open the lock, decoding provides the information necessary to create a working key. In this respect, decoding is the middle ground between [[Lockpicking|lockpicking]] and [[Impressioning|impressioning]] techniques.
'''Decoding''' is the process of determining the correct position of components in a [[lock]] through manipulation, disassembly, measurement, and observation of [[key]]s or lock components. While it does not necessarily open the lock, decoding provides the information necessary to create a working key. In this respect, decoding is the middle ground between [[lockpicking]] and [[impressioning]] techniques.


Decoding techniques are quite varied and leave a wide range of [[Forensics|forensic]] evidence. Most lock-centric decoding techniques are considered [[Covert_Entry|covert]] because of the invasive manipulation required. In contrast, most key-centric techniques are forms of [[Surreptitious_Entry|surreptitious entry]] because they focus on observation and measurement.
Decoding techniques are quite varied and leave a wide range of [[Forensics|forensic]] evidence. Most lock-centric decoding techniques are considered [[Covert_Entry|covert]] because of the invasive manipulation required. In contrast, most key-centric techniques are forms of [[surreptitious entry]] because they focus on observation and measurement.


__TOC__
__TOC__
Line 15: Line 15:
Decoding via manipulation focuses on invasive manipulation and analysis of the locking components to determine their correct positions. A wide range of tools and techniques exist to determine the number, size, shape, and position of components. In some cases, lockpicking or impressioning is a prerequisite to the decoding process.
Decoding via manipulation focuses on invasive manipulation and analysis of the locking components to determine their correct positions. A wide range of tools and techniques exist to determine the number, size, shape, and position of components. In some cases, lockpicking or impressioning is a prerequisite to the decoding process.


* In [[Pin_tumbler|pin-tumbler]] locks, a tool may be used to determine bottom pin sizes once the lock has been picked. The tool measures the distance each pin can be raised until it gets to the top of the plug. Tools resemble pin-tumbler picks placed on a lever.
* In [[pin-tumbler]] locks, a tool may be used to determine bottom pin sizes once the lock has been picked. The tool measures the distance each pin can be raised until it gets to the top of the plug. Tools resemble pin-tumbler picks placed on a lever.
* Sophisticated scales to weigh components to determine their size. Generally, heavier components signify lower depths because of the additional material.
* Sophisticated scales to weigh components to determine their size. Generally, heavier components signify lower depths because of the additional material.
* Tools to count or identify characterstics of components to identify their code.
* Tools to count or identify characterstics of components to identify their code.
* Some lockpicking tools, namely [[Axial|axial/tubular]] picks and the [[Sputnik]] tool, automatically decode or impression the lock while it is being picked.
* Some lockpicking tools, namely [[Axial|axial/tubular]] picks and the [[Sputnik]] tool, automatically decode or impression the lock while it is being picked.
* [[Impressioning]], in a general sense, is a form of manipulation-based decoding that directly produces a working key.
* [[Impressioning]], in a general sense, is a form of manipulation-based decoding that directly produces a working key.
* In [[combination]] locks, manipulation of the dial(s), handle, and [[Bolt|shackle]] can be used to determine the correct combination.


== Disassembly ==
== Disassembly ==
Line 27: Line 28:
== Measurement ==
== Measurement ==


The key is measured to decode the values of the bitting cuts and the keyway profile. Various tools exist for specific locks, but a ruler or micrometer is equally effective in most cases.
The key is measured to decode the values of the bitting cuts and the keyway profile. Various tools exist for specific locks, such as [[key gauge]]s, but a ruler or micrometer is equally effective in most cases.


== Optical, Photographic, and Visual ==
== Optical, Photographic, and Visual ==
Line 35: Line 36:
* Key bitting pattern. This process is known as "sight-reading" a key.
* Key bitting pattern. This process is known as "sight-reading" a key.
* Key codes on the bow. Can also be used to identify the keyway of a lock.
* Key codes on the bow. Can also be used to identify the keyway of a lock.
* Presence and position of secondary locking mechanisms such as [[Sidebar|sidebars]].
* Presence and position of secondary locking mechanisms such as [[sidebar]]s.


In the case of colored lock components, a borescope or similar tool may be used to look inside the lock and determine component positions. Many [[Pin_tumbler|pin-tumbler]] locks use colors to symbolize different bottom pin sizes.
In the case of colored lock components, a borescope or similar tool may be used to look inside the lock and determine component positions. Many [[pin-tumbler]] rekeying kits use colors to symbolize different bottom pin sizes.


In [[Wafer|wafer]] locks, a borescope or similar tool can be used to look at the position of each wafer as it rests in the lock.
In [[wafer]] locks, a borescope or similar tool can be used to look at the position of each wafer as it rests in the lock.


In [[Lever|lever]] locks, a borescope or similar tool can be used to look at the shape of each lever, but requires that a secondary tool (a key) be used to move other levers out of the way.
In [[lever]] locks, a borescope or similar tool can be used to look at the shape of each lever, but requires that a secondary tool (called a "setup key") be used to move other levers out of the way.


== Radiological ==
== Radiological ==


Radiological imaging uses penetrating radiation (X, beta, and gamma rays) to see inside the lock or safe, revealing the proper positions of components. This is most often used against [[Combination|combination]] locks to determine the position of each gate in the wheel pack. This is a surreptitious entry technique unless the use of such a device can be detected. In many cases, even if the ability to detect this form of entry is available it may be considerably expensive.
Radiological imaging uses penetrating radiation (X, beta, and gamma rays) to see inside the lock or safe, revealing the proper positions of components. This is most often used against [[combination]] locks to determine the position of each gate in the wheel pack. This is a surreptitious entry technique unless the use of such a device can be detected. In many cases, even if the ability to detect this form of entry is available it may be considerably expensive.


The use of low-density wheel materials (such as Delrin) combats this attack. Group 1R safe locks are specifically designed to defeat various radiological attacks as well as provide manipulation protection.
The use of low-density wheel materials (such as Delrin) combats this attack. Group 1R safe locks are specifically designed to defeat various radiological attacks as well as provide manipulation protection.

Revision as of 22:06, 27 September 2010

Decoding

Decoding is the process of determining the correct position of components in a lock through manipulation, disassembly, measurement, and observation of keys or lock components. While it does not necessarily open the lock, decoding provides the information necessary to create a working key. In this respect, decoding is the middle ground between lockpicking and impressioning techniques.

Decoding techniques are quite varied and leave a wide range of forensic evidence. Most lock-centric decoding techniques are considered covert because of the invasive manipulation required. In contrast, most key-centric techniques are forms of surreptitious entry because they focus on observation and measurement.

History

Add to me!

Manipulation

Decoding via manipulation focuses on invasive manipulation and analysis of the locking components to determine their correct positions. A wide range of tools and techniques exist to determine the number, size, shape, and position of components. In some cases, lockpicking or impressioning is a prerequisite to the decoding process.

  • In pin-tumbler locks, a tool may be used to determine bottom pin sizes once the lock has been picked. The tool measures the distance each pin can be raised until it gets to the top of the plug. Tools resemble pin-tumbler picks placed on a lever.
  • Sophisticated scales to weigh components to determine their size. Generally, heavier components signify lower depths because of the additional material.
  • Tools to count or identify characterstics of components to identify their code.
  • Some lockpicking tools, namely axial/tubular picks and the Sputnik tool, automatically decode or impression the lock while it is being picked.
  • Impressioning, in a general sense, is a form of manipulation-based decoding that directly produces a working key.
  • In combination locks, manipulation of the dial(s), handle, and shackle can be used to determine the correct combination.

Disassembly

Disassembly of the lock will allow direct counts and measurements of internal components. These can be compared with manufacturing data to produce a working key. In some cases, disassembled components are imprinted with their sizes or codes, simplifying the process.

Measurement

The key is measured to decode the values of the bitting cuts and the keyway profile. Various tools exist for specific locks, such as key gauges, but a ruler or micrometer is equally effective in most cases.

Optical, Photographic, and Visual

Visual observation of a key or lock allows for various forms of decoding.

  • Key bitting pattern. This process is known as "sight-reading" a key.
  • Key codes on the bow. Can also be used to identify the keyway of a lock.
  • Presence and position of secondary locking mechanisms such as sidebars.

In the case of colored lock components, a borescope or similar tool may be used to look inside the lock and determine component positions. Many pin-tumbler rekeying kits use colors to symbolize different bottom pin sizes.

In wafer locks, a borescope or similar tool can be used to look at the position of each wafer as it rests in the lock.

In lever locks, a borescope or similar tool can be used to look at the shape of each lever, but requires that a secondary tool (called a "setup key") be used to move other levers out of the way.

Radiological

Radiological imaging uses penetrating radiation (X, beta, and gamma rays) to see inside the lock or safe, revealing the proper positions of components. This is most often used against combination locks to determine the position of each gate in the wheel pack. This is a surreptitious entry technique unless the use of such a device can be detected. In many cases, even if the ability to detect this form of entry is available it may be considerably expensive.

The use of low-density wheel materials (such as Delrin) combats this attack. Group 1R safe locks are specifically designed to defeat various radiological attacks as well as provide manipulation protection.

See also