View source for UL 437

=UL 437=

'''UL 437''' is a [[Security Ratings|security rating]] from Underwriters Laboratories that provides a barometer for the security of a [[Key|keyed]] lock. Included are door locks, locking cylinders, security container key locks, and two-key locks. Though many manufacturers reference it as such, UL 437 does not define the standards for a "high security lock" in the United States. It is, however, referenced by higher standards, such as [[156.30|BHMA/ANSI 156.30]].

__TOC__

== Definitions ==

1. A '''product''' refers to any type of lock or component defined within the standard.
2. A '''door lock''' is a rim or mortise locking assembly that is used on doors to deter unauthorized opening by one or more of the following methods:
:* Bypass
:* Lockpicking
:* Impressioning
:* Destructive Entry (specifically: punching, sawing, drilling, pulling, and other methods using small hand tools)
3. A '''locking cylinder''' is a key [[cylinder]] that is used within door locks, alarm control and shunt switches, utility locks, and similar devices to resist unauthorized opening by one or more of the following methods:
:* Lockpicking
:* Impressioning
:* Destructive Entry (specifically: "forcing methods", drilling, and pulling)
4. A '''security container key lock''' is a lock designed for use on key-locked [[safe]]s, collection safes, and similar security containers to resist unauthorized opening by one or more of the following methods:
:* Lockpicking
:* Impressioning                                                                                                                                                          
:* Destructive Entry (specifically: "forcing methods", punching, drilling, and pulling)

== General Construction and Operating Requirements ==

* The product shall be constructed so that it may be readily and conveniently operated when the proper key or keys are used.
* The lock must be practicable for installation by a trained locksmith and able to be installed in a position or location that does not degrade  its burglary-resistant qualities.
* Parts must maintain a high degree of tolerance and uniformity. This is especially important with regard to bittings.
* Locks must be constructed of brass, bronze, stainless steel, or an equivalent corrosion resistant material. Alternatively, locks shall have a protective finish that meets salt-spray tests.

== Lock Requirements ==

=== [[Differs]] ===
* Door locks and cylinders must provide at least 1000 key [[differs]]. Security containers must provide at least 1,000,000 differs. Two-key locks must provide at least 64 guard key differs and at least 15,000 customer key differs.

=== Security Container Key Locks ===
* Keys shall be field changeable.
* The [[bolt]] lever must fit snugly on its post and shall be secured tightly.
* The fence face shall be perpendicular to the plane of the tumblers.
* The wheels, tumblers, levers, or pins must be at right angles to their mounting post.
* In a [[combination]] lock, clearance between the fence face and the tumbler wheels shall not be less that 0.025" (0.64 mm) when the bolt lever is raised by means of a driver cam, and not less than 0.015" (0.38 mm) when the bolt lever is raised by means other than the driver cam.
* Mechanical means must be provided that immobilize the bolt if the lock is punched or pulled.
* The tolerance between [[plug]] and [[Cylinder|shell]] in a [[pin-tumbler]] lock must be less than one cut depth.

===Endurance Tests===
* The lock must function properly during 10,000 complete cycles of operation at a rate not exceeding 50 cycles per minute.
* A lock with a field-changeable key or removable core design must function properly after 50 changes of the core or key.

===Attack Resistance Tests===

==== Requirements ====

* Tools used include common hand tools, hand or portable electric tools, drills, saw blades, puller mechanisms, and picking tools. For door locks only, pry bars up to three feet (0.9 m) are also used.
* Tools used for two-key locks must not include saws, puller mechanisms, or portable electric drills.
* Common hand tools are defined as chisels, screwdrivers no more than 15" (380 mm) long, hammers having three pound (1.36 kg) head weight, jaw-gripping wrenches, and pliers.
* Puller devices are to be either a slam-hammer mechanism, having a maximum head weight of three pounts (1.36 kg) or a screw type.
* [[Lockpicks|Picking tools]] are common or standard patterns, as well as those designed for use on a particular make or design of cylinder.
* Portable electric tools are identified as high-speed handheld drills that meet the following criteria:
** Maximum operating speed of 1900 RPM 
** Maximum 0.25" (6.4 mm) chuck size
** Use high-speed drill bits
** Use electrically operated vibrating needles

==== Test time for attack resistance ====

Times are listed in minutes and vary based on the type of attack and the type of lock.

{| class="prettytable"
|-
! Test || Door Locks/Cylinders || Security Container Key Locks || Two-Key Locks
|-
! Picking
| 10 || 30 || 45
|-
! Impressioning
| 10 || 30 || 45
|-
! Forcing
| 05 || 30 || 05
|-
! Drilling
| 05 || 30 || n/a
|-
! Sawing
| 05 || 30 || n/a
|-
! Prying
| 05 || 30 || n/a
|-
! Pulling
| 05 || 30 || n/a
|-
! Punching
| 05 || 30 || n/a
|}

==== Test methods ====
Locks are subjected to the following eight tests:

* [[Lockpicking]]
* [[Impressioning]]
* [[Forced Entry]]
** Forcing (torsion)
** Drilling
** Prying
** Pulling
** Punching
** Sawing

== UL 437 rated locks ==

Add to me!

<!-- TODO Clean these up and populate this section. Make sure to fact check against UL's site for current/outdated model #s.
* Abloy Oy - CY402D CY403D CY411D CY413D (mortoise), CY402N CY403N CY411N CY412N CY413N CY415N CY407D CY408D CY409D CY410D (cylinder)
* ASSA, Inc. - 6000 series with or without E and V models 8551 8551S 8551SS, removable core 6551RC
* BEST Access Systems - 1E-7J4
* Cheul Young Co. - Scorpion CX5 CX7 K1K 9115 9125 9145
* Compx International Inc - Tubar series locking cylinder
* Corbin Russwin Inc - Series 1000,2000,3000
* Folger Adam - Models 10, 51S, 110 Mogul 190 Maxi-mogul
* Goal Co. Ltd. - Models V-LX 5-L V-LX-5R
* Illinois lock co. - DUO: 527 805 809 8000-8099 9000-9099 9625 9626 (w or w/o profile), L, R, RT, LR, or LRT. 
* JJ Mackay Canada Ltd - Part 60H50520050 MKH4000 parking meter cylinder
* KABA Ilco corp - 4730-4733
* Medeco Security Locks, Inc - 51s, 10 SERIES, 32s w/ removable core, 51S-20, 645 t-handle locking cylinder, Models 64W0150, 64W0950, 64W1050
* Mul-T-Lock Ltd - 800, 850, 858, 860, 861
* RR Brink Locking Systems Inc - Mogul locking cylinders, 100, 610, 710
* Sargent Mfg. Co - 40 series, keso 4251B 4252A 4264E 4271D 4272D 4273D 4274D 4276D
* Southern Steel - Mogul locking cylinder, M5 P5
* Supra Products Inc - HS1 locking cylinder
* Yale U5109, U5153
-->

== See also ==

* [[Security Ratings]]
* [[UL 768]]
* [[156.30|BHMA/ANSI 156.30]]
* [[156.50|BHMA/ANSI 156.50]]

[[Category:Security Ratings]]