FAB NZS3 - Revision history

Datagram at 21:20, 24 March 2022

2022-03-24T21:20:10Z

← Older revision		Revision as of 21:20, 24 March 2022
Line 22:		Line 22:
	<br clear="all">		<br clear="all">

	== ~~Description~~ ==		== Principles of operation ==
	All FAB NZS3 locks share the same core, just the outside housing differs. The locking mechanism is quite unusual - the core rotation is blocked by three massive pins, that rest in the dimples of the backplate. Each of those pins is supported by the sidebar, which can move towards the front of the lock when the correct key is inserted, allowing the blocking pins to clear the backplate dimples. Each of those sidebars is controlled by one blade of the key; each blade has four cuts and there are only three cut depths available. These cuts operate four pins; the pins are quite uncommon, as there are only ~~keypins~~ present in the lock. These pins protrude through the holes in the sidebar; each of those pins has a thin section at one of three heights - when all pins are lifted so the thin sections are at the depth of the sidebar, the sidebar can retract and allows operation of the lock.		All FAB NZS3 locks share the same core, just the outside housing differs. The locking mechanism is quite unusual - the core rotation is blocked by three massive pins, that rest in the dimples of the backplate. Each of those pins is supported by the sidebar, which can move towards the front of the lock when the correct key is inserted, allowing the blocking pins to clear the backplate dimples. Each of those sidebars is controlled by one blade of the key; each blade has four cuts and there are only three cut depths available. These cuts operate four pins; the pins are quite uncommon, as there are only key pins present in the lock. These pins protrude through the holes in the sidebar; each of those pins has a thin section at one of three heights - when all pins are lifted so the thin sections are at the depth of the sidebar, the sidebar can retract and allows operation of the lock.

	The keyway is asymmetric, which together with protrusions on two of the key blades allows insertion and removal of the key only when its orientation is correct.		The keyway is asymmetric, which together with protrusions on two of the key blades allows insertion and removal of the key only when its orientation is correct.
Line 29:		Line 29:
	The core contains drill protection in the form of a metal sandwich crimped to the core face, but even with it the lock was only marketed as belonging to the resistance class 3.		The core contains drill protection in the form of a metal sandwich crimped to the core face, but even with it the lock was only marketed as belonging to the resistance class 3.

	== ~~Dissassembly~~ instructions ==		== Disassembly instructions ==
	This lock is next to impossible to disassemble non-destructively. First of all, the crimped-on part holding the backplate needs to be removed, allowing removal of the backplate and the core itself from the protective housing.		This lock is next to impossible to disassemble non-destructively. First of all, the crimped-on part holding the backplate needs to be removed, allowing removal of the backplate and the core itself from the protective housing.
	Then, the core sleeve is crimped to the core itself and only after it is removed, the core can be disassembled, although care must be taken not to catch/mangle springs by the crimped connection remnants.		Then, the core sleeve is crimped to the core itself and only after it is removed, the core can be disassembled, although care must be taken not to catch/mangle springs by the crimped connection remnants.
Line 60:		Line 60:
	File:FAB_NZS3_everything_least.png\|FAB NZS3C disassembled.		File:FAB_NZS3_everything_least.png\|FAB NZS3C disassembled.
	File:FAB_NZS3_pins_block_bars_least.png\|Detail of the pins, sidebars, ...		File:FAB_NZS3_pins_block_bars_least.png\|Detail of the pins, sidebars, ...
	File:FAB_NZS3_pins_detail_least.png\|Detail of the three available ~~keypin~~ forms.		File:FAB_NZS3_pins_detail_least.png\|Detail of the three available key pin forms.

	</gallery></div>		</gallery></div>

Least: Added the patent.

2021-11-25T20:39:02Z

Added the patent.

← Older revision		Revision as of 20:39, 25 November 2021
Line 7:		Line 7:
	\| lock_type = [[Cylinder]]		\| lock_type = [[Cylinder]]
	\| lock_design = [[Pin_tumbler\|Pin-tumbler]]		\| lock_design = [[Pin_tumbler\|Pin-tumbler]]
	\| patent =		\| patent = 255002
	\| years_produced =		\| years_produced =
	\| related =		\| related =
Line 72:		Line 72:
	* [https://youtu.be/OMQ_-FctT50 FAB NZS3 Info and pick]		* [https://youtu.be/OMQ_-FctT50 FAB NZS3 Info and pick]
	* [https://youtu.be/kJywP_OJmKw FAB NZS3C gutting]		* [https://youtu.be/kJywP_OJmKw FAB NZS3C gutting]
			* [https://isdv.upv.cz/doc/FullFiles/Patents/FullDocuments/255/255002.pdf FAB NZS3 core patent (Czech)]
			* [https://isdv.upv.cz/doc/FullFiles/Patents/FullDocuments/251/251112.pdf FAB NZS3A patent (Czech)]

	[[Category:FAB]]		[[Category:FAB]]
	[[Category:Lock models]]		[[Category:Lock models]]
	[[Category:Pin-tumbler locks]]		[[Category:Pin-tumbler locks]]

Least: FAB NZS3 page created.

2021-11-17T20:59:51Z

FAB NZS3 page created.

New page

=FAB NZS3=

{{Lock model
| name = FAB NZS3
| Img = File:FAB_NZS3C_least.png
| maker = [[Fab]]
| lock_type = [[Cylinder]]
| lock_design = [[Pin_tumbler|Pin-tumbler]]
| patent =
| years_produced =
| related =
| spec_on =
| spec_comptype =
| spec_comp =
}}

'''FAB NZS3''' is a family of locks, that is completely different from the rest of [[Fab|FAB]]'s production. The family contains the A version, that is to be used in place of a double euro lock (although a special security fitting is necessary), the B version for secondary door locks, C version for closets and E version for cars.
It belonged to a resistance class 3 and it had a security card to control unauthorized key copying.
Most probably due to its unusual form factor and its high price the lock didn't proliferate much and it doesn't seem to be produced anymore.

__TOC__
<br clear="all">

== Description ==
All FAB NZS3 locks share the same core, just the outside housing differs. The locking mechanism is quite unusual - the core rotation is blocked by three massive pins, that rest in the dimples of the backplate. Each of those pins is supported by the sidebar, which can move towards the front of the lock when the correct key is inserted, allowing the blocking pins to clear the backplate dimples. Each of those sidebars is controlled by one blade of the key; each blade has four cuts and there are only three cut depths available. These cuts operate four pins; the pins are quite uncommon, as there are only keypins present in the lock. These pins protrude through the holes in the sidebar; each of those pins has a thin section at one of three heights - when all pins are lifted so the thin sections are at the depth of the sidebar, the sidebar can retract and allows operation of the lock.

The keyway is asymmetric, which together with protrusions on two of the key blades allows insertion and removal of the key only when its orientation is correct.

The core contains drill protection in the form of a metal sandwich crimped to the core face, but even with it the lock was only marketed as belonging to the resistance class 3.

== Dissassembly instructions ==
This lock is next to impossible to disassemble non-destructively. First of all, the crimped-on part holding the backplate needs to be removed, allowing removal of the backplate and the core itself from the protective housing.
Then, the core sleeve is crimped to the core itself and only after it is removed, the core can be disassembled, although care must be taken not to catch/mangle springs by the crimped connection remnants.

Complete gutting (without removal of the backplate collar) can be seen in the video referenced below.
== Vulnerabilities ==

The FAB NZS3 is vulnerable to one or more of the following:

* [[Lockpicking]]
* [[Decoding]]
* [[Impressioning]]

== Gallery ==
<div align="center"><gallery>
File:FAB_NZS3_keyway_least.png|Note the keyway asymmetry (here the top side is shorter).
File:FAB_NZS3_key_bottom_least.png|
File:FAB_NZS3_key_side_least.png|
File:FAB_NZS3_back_collar_removed_least.png|Back of the NZS3C lock with the collar removed.
File:FAB_NZS3_backplate_least.png|Detail of the backplate.
File:FAB_NZS3_core_back_least.png|Core back - facing the backplate.
File:FAB_NZS3_core_front_least.png|Front of the core with the drill-protection.
File:FAB_NZS3_core_front_protection_least.png|Drill protection sandwich.
File:FAB_NZS3_core_sleeve_least.png|Core sleeve removed using Dremel.
File:FAB_NZS3_core_front_inside_least.png|Front of the core with removed drill-protection.
File:FAB_NZS3_empty_core_back_least.png|View of the back of the empty core.
File:FAB_NZS3_empty_core_front_least.png|View of the front of the empty core.
File:FAB_NZS3_empty_core_least.png|Side view of the empty core.
File:FAB_NZS3_empty_core_side_least.png|Side view of the empty core with the sidebar groove.
File:FAB_NZS3_everything_least.png|FAB NZS3C disassembled.
File:FAB_NZS3_pins_block_bars_least.png|Detail of the pins, sidebars, ...
File:FAB_NZS3_pins_detail_least.png|Detail of the three available keypin forms.

</gallery></div>

== References ==
<references />

== See also ==

* [[Fab|FAB]]
* [https://youtu.be/OMQ_-FctT50 FAB NZS3 Info and pick]
* [https://youtu.be/kJywP_OJmKw FAB NZS3C gutting]

[[Category:FAB]]
[[Category:Lock models]]
[[Category:Pin-tumbler locks]]