Scorpion CX-5: Difference between revisions
(→CX5) |
|||
| Line 1: | Line 1: | ||
= | =CX5= | ||
{{Lock model | {{Lock model | ||
|name= | |name=CX5 | ||
|Img=File:CX5 cylinder.jpg | |Img=File:CX5 cylinder.jpg | ||
|maker=[CX5] | |maker=[CX5] | ||
| Line 12: | Line 12: | ||
}} | }} | ||
The '''CX5''' is a [[UL 437]] rated [[pin-tumbler]] lock made by [ | The '''CX5''' is a [[UL 437]] rated [[pin-tumbler]] lock made by [CX5]. It uses six pin-tumblers and five springless [[Side pin|finger pins]] which interface with a [[sidebar]]. The CX5 is redistributed (and sometimes rebranded) by a number of smaller lock manufacturers such as Marks USA in the United States. The CX5 is functionally identical to the earlier [[Scanlock]] design. | ||
__TOC__ | __TOC__ | ||
Revision as of 00:02, 18 July 2010
CX5
| CX5 | |
|
File:CX5 cylinder.jpg | |
| Name | CX5 |
|---|---|
| Manufacturer | [CX5] |
| Lock Type | Varied |
| Lock Design | Pin-tumbler, Sidebar |
| Year(s) Produced | 2003-Present |
| Patent | US 6,477,876 US D516,897 |
The CX5 is a UL 437 rated pin-tumbler lock made by [CX5]. It uses six pin-tumblers and five springless finger pins which interface with a sidebar. The CX5 is redistributed (and sometimes rebranded) by a number of smaller lock manufacturers such as Marks USA in the United States. The CX5 is functionally identical to the earlier Scanlock design.
Principles of operation
The CX5 uses six pin-tumblers and a sidebar as primary locking components. In function, it is similar to other sidebar-based pin-tumblers, particularly the ASSA Twin 6000 and the Mul-T-Lock MT5+. Both pin-tumblers and sidebar finger pinss must be properly positioned to rotate the plug. The CX-5 allows for ten pin-tumbler sizes, for a total of 1,000,000 (106) theoretical key differs. Given a MACS of 6, the real number of key differs is closer to 400,000 for any given sidebar bitting. Driver (top) pins are spooled to frustrated lockpicking attacks. The spool design is similar to those used in the ASSA Twin 6000.
The sidebar is made of steel and positioned at 9 o'clock in the plug. The sidebar interfaces with five finger pins of four possible depths, giving the CX-5 a total of 1024 (45) theoretical sidebar differs. Each finger pin has one true gate and one false (shallow) gate. The key has a milled track on the left hand side that picks up the legs of each finger pins and properly positions their true gates. Finger pins are left springless to promote longevity of the key track and the finger pin legs.[1]
- CX5 key.jpg
Pin-tumbler bitting and sidebar track on the CX-5 key.
- CX5 pins aligned.jpg
Pins properly aligned at the shear line.
- CX5 sidebar aligned.jpg
Sliders properly aligned.
- CX5 sidebar misaligned.jpg
Sliders misaligned.
Notes
- Pin-tumbler bitting codes are designated 0 (0.339") to 9 (0.204"), jumping in incremenents of 0.015".
Disassembly instructions
The CX-5 can be disassembled in the same way as a standard pin-tumbler lock. When a key is not inserted into the exposed plug the springless finger pins and sidebar will fall out of the plug.
- Remove the cam or C-clip.
- Insert the key and turn the plug 45-90 degrees.
- Withdraw the plug from the cylinder. (A plug follower is recommended)
OR
- Remove the chamber casings and take out each pin-stack individually
- Remove the cam or C-clip.
- Withdraw the plug from the cylinder.
Vulnerabilities
The CX-5 may be vulnerable to one of more of the following:
Notes
- Key bumping is only possible given a bump key with the correct sidebar bitting.
Gallery
- CX5 pins all.jpg
- CX5 pins close.jpg
- CX5 sidebar.jpg
- CX5 sliders.jpg
References
- ↑ PULFORD, Graham (2007). High Security Mechanical Locks: An Encyclopedic Reference. ISBN 0750684372.
