Goal Z: Difference between revisions
Red Wanderer (talk | contribs) |
Red Wanderer (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
={{PAGENAME}}= | ={{PAGENAME}}= | ||
{{Lock_model | {{Lock_model | ||
| name = | | name = GOAL Z | ||
| Img = File:Goal Z.jpeg | | Img = File:Goal Z.jpeg | ||
| Img_size = 150px | | Img_size = 150px | ||
| Line 15: | Line 15: | ||
}} | }} | ||
The Z is a [[pin tumbler]] lock made by [[Goal]]. It contains 7 pins and | The Z is a [[pin tumbler]] lock made by [[Goal]]. It contains 7 pins and 2 core-centering ball bearings. This lock features overmilling in the plug, and security drivers which are a mix of thin and thick lipped gin spools. | ||
== Principles of Operation == | |||
The GOAL Z functions as a standard pin tumbler lock with 7 pins. To open the lock, all pin-tumblers must be aligned at the [[shear line]]. GOAL utilizes a variety of security drivers to deter picking, with the Z using a mix of thin and thick lipped spool drivers. Additionally, the plug features overmilling to catch pins as they are lifted to shear. Key pins are torpedo shaped to create overset traps. GOAL Z has 8 different cuts depths for pins, with 7 and 8 cuts on the key having standard drivers rather than spools. Unlike many high security locks, GOAL prints a code on the key that directly shows both the keyway type and the cut depths for all pins. | |||
== Disassembly Instructions == | == Disassembly Instructions == | ||
| Line 22: | Line 26: | ||
{{Pin-tumbler standard disassembly}} | {{Pin-tumbler standard disassembly}} | ||
== Vulnerabilities == | |||
The GOAL Z may be vulnerable to one or more of the following: | |||
* [[Lockpicking]] | |||
* [[Impressioning]] | |||
* [[Decoding]] | |||
* [[Bumping|Key bumping]] | |||
== Gallery == | == Gallery == | ||
Revision as of 17:55, 7 November 2022
Goal Z
| GOAL Z | |
 | |
| Name | GOAL Z |
|---|---|
| Manufacturer | Goal |
| Lock Type | cylinder |
| Lock Design | Pin-tumbler, |
| Related Locks | |
| Goal P | |
The Z is a pin tumbler lock made by Goal. It contains 7 pins and 2 core-centering ball bearings. This lock features overmilling in the plug, and security drivers which are a mix of thin and thick lipped gin spools.
Principles of Operation
The GOAL Z functions as a standard pin tumbler lock with 7 pins. To open the lock, all pin-tumblers must be aligned at the shear line. GOAL utilizes a variety of security drivers to deter picking, with the Z using a mix of thin and thick lipped spool drivers. Additionally, the plug features overmilling to catch pins as they are lifted to shear. Key pins are torpedo shaped to create overset traps. GOAL Z has 8 different cuts depths for pins, with 7 and 8 cuts on the key having standard drivers rather than spools. Unlike many high security locks, GOAL prints a code on the key that directly shows both the keyway type and the cut depths for all pins.
Disassembly Instructions
The Z is disassembled in the same way as a traditional pin-tumbler cylinder. Some care should be used when removing the plug as the biasing bearings are spring loaded and will launch out if they are not covered. The bearings are on either side of the plug and slight back from the face. Thier position is indicated on the kik cylinder by 2 small holes.
- Remove the cam or C-clip.
- Insert the key and turn the plug 45-90 degrees.
- Withdraw the plug from the cylinder. (A plug follower is recommended)
OR
- Remove the chamber casings and take out each pin-stack individually
- Remove the cam or C-clip.
- Withdraw the plug from the cylinder.
Vulnerabilities
The GOAL Z may be vulnerable to one or more of the following:
Gallery
A GOAL Z cylinder.
A GOAL Z key.
The profile of a GOAL Z key.
Sample pinning, with thin spools and standards.
A key pin from a GOAL Z.
A thick lipped GOAL Z spool.
A view of the interior of a GOAL Z shell.
A GOAL Z plug showing the keyway.
GOAL Z plug, with overmilling visible.
Example of a GOAL Z key, with bitting code written on the side.
See also
 |
This article is a stub. You can help Lockwiki by expanding it. |
