Goal V18
GOAL V18
| GOAL V18 | |
 | |
| Name | GOAL V18 |
|---|---|
| Manufacturer | GOAL |
| Lock Type | cylinder |
| Lock Design | Pin-tumbler, Dimple |
| Specifications | |
| # of Components | 18 or 19 |
| Component Type | Pin-tumbler |
| Related Locks | |
| GOAL D9 | |
The V18 is a dimple lock made by GOAL. Drilled for 21 pins, it contains up to 19 active pins and two core-centering pins. Pins are arranged in rows of seven on the left, top, and right of the keyway.
Principles of operation
The GOAL V18 utilizes dimple keys but functions the same as a standard pin-tumbler lock. The dimple key of the V18 has four cut depths for side pins and three, different cut depths for pins in the top row. The design offers 12 billion key differences when pinned with 18 active pins. The key is bitted on the sides and edges of the blade and is reversible. To open the lock, all active pin-tumblers -- across all three rows of pins -- must be aligned at the shear line.
The core centering pins are always located one each on the left and right side of the lock, but the location within each row can vary. The centering pins consist of a pin which sits in the plug without entering the keyway which has a concave top, and a ball bearing which sits in the bible. Centering pin stacks are distinguishable by their shorter and wider springs. Mastering in a V18 utilizes dummy keypins and drivers, which take the place of active pins and do not interact with the key.
The concave surface of a GOAL V18 click pin.
Pin chambers in a GOAL V18 plug, narrowing at the bottom.
GOAL utilizes a variety of security pins to deter picking, the V18 uses a mix of thin and thick lipped mushroom spool drivers. Key pins are most often a combination of t-pins and tapered spools which are torpedo shaped to create overset traps. Additionally, the plug features overmilling to catch pins as they are lifted to shear. See also Pin-tumbler (Principles of Operation)
Model variations
The V18 is sold in two primary form factors:
- A compact cylinder used in Goal's AD-series dead locks (housing V-TX)
- A rim cylinder for standard applications (model V-LX 5)
Both utilize the same components and general security features. The rim cylinder is larger, more robust, and incorporates steel ball bearings for drill protection. The compact cylinder features easy-to-remove bible covers and hence is much easier to re-pin.
The V18 system is available in a UL 437 rated cylinder.
Gallery
Front view of a GOAL V18 rim cylinder
Exterior of a V18 rim cylinder.
Rear view of a V18 rim cylinder.
Front view without faceplate, showing drill protection.
Exterior of a V18 compact cylinder.
A V18 cylinder and key.
A V18 key.
Key & cylinder of the V18 with that of a GOAL D9.
V18 key, showing dimple cuts.
Pins and springs from a V18.
Side pins
Top pins
Pins and springs.
Right side of a GOAL V18 plug.
Bottom of a GOAL V18 plug.
Top of a GOAL V18 plug.
Pin chambers in a GOAL V18 plug, top row.
Keyway without "warding" pins.
Keyway with "warding" pins.
Ward pins.
Two tension tools combined to fit the wide keyway of the V18.
See also
 |
This article is a stub. You can help Lockwiki by expanding it. |
