Weiser Classic

Weiser

---

Weiser (standard)
Name	Weiser (standard)
Manufacturer	Weiser
Lock Type	Cylinder
Lock Design	Pin-tumbler
Specifications
# of Components	5
Component Type	Pin-tumbler

The standard cylinder made by Weiser is a pin-tumbler lock.

Principles of operation

See also: Pin-Tumbler (Principles of operation)

The standard Weiser cylinder is a traditional pin-tumbler that uses five pin stacks. To open the lock, all pin stacks must be aligned at the shear line to allow the plug to rotate. There are ten key pin heights and eleven key cut depths with the use of master pins.

Keying Specifications

Cut	Spacing	Depth	Key Pin	Master	Driver
0	n/a	.315"	.168"	n/a	.185"
1	.237"	.297"	.186"	n/a	.185"
2	.393"	.279"	.204"	.036"	.185"
3	.549"	.261"	.222"	.054"	.185"
4	.705"	.243"	.240"	.072"	.185"
5	.861"	.225"	.258"	.090"	.185"
6	1.017"	.207"	.276"	.108"	.185"
7	n/a	.189"	.294"	.126"	.185"
8	n/a	.171"	.312"	.145"	.185"
9	n/a	.153"	.330"	.160"	.185"

Key Blank	Effective Plug Diameter	Shoulder to First Cut	Root to Root	Depth Increment	Cut Width	MACS
1054WB, WR3	.483"	.237"	.156"	.018"	.090"	6

Disassembly instructions

The standard cylinder can be disassembled with the typical pin-tumbler disassembly method. The design of the

pin-chamber casing facilitates quick disassembly and full rekeying.

1. Remove the cam or C-clip.
2. Insert the key and turn the plug 45-90 degrees.
3. Withdraw the plug from the cylinder. (A plug follower is recommended)

OR

1. Remove the chamber casings and take out each pin-stack individually
2. Remove the cam or C-clip.
3. Withdraw the plug from the cylinder.

Removing cylinders from Weiser knobs

1. Pull back on the spindle while rotating the cylinder plug.
2. Pull the cylinder from the front of the knob.

Vulnerabilities

The standard lock may be vulnerable to one or more of the following:

• Lockpicking
• Bumping
• Impressioning
• Decoding

Gallery

• 

  The Weiser logo on a deadbolt.

See also

• Weiser
• Pin-tumbler