File:FAB NZS3 core sleeve least.png

From Lockwiki
Revision as of 17:30, 17 November 2021 by Least (talk | contribs) (FAB NZS3 core sleeve with the spring loading cut-out. The crimp point was freed by a Dremel and bent to allow disassembly and later re-assembly.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

Original file ‎(1,000 × 901 pixels, file size: 1.04 MB, MIME type: image/png)

Summary

FAB NZS3 core sleeve with the spring loading cut-out. The crimp point was freed by a Dremel and bent to allow disassembly and later re-assembly.

Licensing

CC some rights reserved.svg
Cc-by new white.svgCc-sa white.svg		 This file is licensed under the Creative Commons Attribution ShareAlike 3.0 License. In short: you are free to share and make derivative works of the file under the conditions that you appropriately attribute it, and that you distribute it only under a license identical to this one. Official license Subject to disclaimers.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current17:30, 17 November 2021Thumbnail for version as of 17:30, 17 November 20211,000 × 901 (1.04 MB)Least (talk | contribs)FAB NZS3 core sleeve with the spring loading cut-out. The crimp point was freed by a Dremel and bent to allow disassembly and later re-assembly.

You cannot overwrite this file.

The following page uses this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "https://www.lockwiki.com/index.php?title=File:FAB_NZS3_core_sleeve_least.png&oldid=10346"