DOM Plura
DOM Plura
| DOM Plura | |
 | |
| Name | DOM Plura |
|---|---|
| Manufacturer | DOM |
| Lock Type | Cylinder |
| Lock Design | Pin-tumbler |
DOM Plura is an entry level lock, designed to withstand most common burglary attempts. Its major advantage are the possibility to combine SKG2 and SKG3 and no special tools are required to assemble the cylinders.
The nickel silver keys are registered, allowing direct order by the number.
Description
The lock contains six pin stacks - two chambers contain spooled drivers, the rest are tapered barrels. Chamber two contains steel driver and key pin, the rest of pins is made of copper. The higher rated cylinder contains more steel stacks. Copper keypins are torpedo shaped, probably to act as an overset trap. The warding is relatively nasty, but the keyway itself is not too paracentric.
Dissassembly instructions
To disassemble a double euro cylinder, use of a pinning shoe is the preferred method.
Other possibility is to use a segmented follower, but that requires that both cores are pulled out a bit to allow a cam removal. Then a core should be rotated to approximately 4:30 or 7:30 o'clock position (135 degrees either clockwise or anti-clockwise) to prevent driver entering a gaps for the cam clutch. Then a segmented follower can be used to remove the core.
Vulnerabilities
The DOM Plura is vulnerable to one or more of the following:
Gallery
DOM Plura key.
DOM Plura keyway detail.
DOM Plura pins detail.
DOM Plura's core detail.
DOM Plura cylinder side view.
DOM Plura's bottom of the bible showing the drill protection.
References
