IKON TK5
IKON TK5
| IKON TK5 | |
 | |
| Name | IKON TK5 |
|---|---|
| Manufacturer | IKON |
| Lock Type | Cylinder |
| Lock Design | Pin-tumbler, Sidebar |
| Specifications | |
| # of Components | 9 |
| Component Type | Pin-tumbler |
The TK5 is a pin-tumbler lock made by the German company IKON. The key bow bears the mark of Bo Widén.
Principles of operation
The TK5 cylinder contains five traditional pin-tumbler stacks. It also utilizes four spring-biased finger pins, that must be lifted and rotated to align with the sidebar, in order for the plug to turn.
Finger pins from an IKON TK5.
A view of the finger pins rotated by the key.
Bitting on an IKON TK5 key.
Disassembly instructions
The IKON TK5 is disassembled much like other euro profile cylinders, with some care for the sidebar and finger pins during disassembly.
The IKON TK5 has a multiple component cam piece that is disassembled before the plug can be removed. To access the cam components, rotate the cam until a hole in the side of the cam is revealed, and insert a tool to press the spring-biased retainer inside. At the same time, pry away the side plates of the cam. The inner two plates can then be removed, allowing the plug to slide through the cylinder housing.
A pinning shoe, used with a modified key, is a common method for removing the plug from a Euro profile cylinder. One plug is rotated 180 degrees either clockwise or counter-clockwise, and the pin retainer inserted into the edge of the keyway. This allows the plug to be removed while preventing the driver pins and springs from escaping the cylinder housing. As an alternative method, a segmented plug follower could be used.
Gallery
IKON TK5 Euro profile cylinder and key.
A key for an IKON TK5 cylinder.
A key for an IKON TK5 cylinder.
Internal components.
Sidebar.
Sidebar channel.
TK5 Euro profile cylinder housing.
A cam from an TK5 Euro profile cylinder.
Security card.
See also
 |
This article is a stub. You can help Lockwiki by expanding it. |
