Weslock Classic

Weslock Classic

Weslock Classic
Name	Weslock Classic
Manufacturer	Weslock
Lock Type	Cylinder
Lock Design	Pin-tumbler

The Classic is a pin-tumbler lock made by Weslock.

Principles of operation

See also: Pin-Tumbler (Principles of Operation)

The Classic is a traditional pin-tumbler that uses five pin stacks. To open the lock, all pin stacks must be aligned at the shear line to allow the plug to rotate. There are ten key pin heights and eleven key cut depths with the use of master pins.

The Classic has a MACS of 5. Many Classic cylinders come with construction keying dimples on the plug.

Keying Specifications

Cut	Spacing	Depth	Key Pin	Master	Driver
0	n/a	.330"	.156"	n/a	.172"
1	.218"	.314"	.172"	n/a	.172"
2	.374"	.299"	.188"	.031"	.172"
3	.530"	.283"	.203"	.047"	.172"
4	.686"	.268"	.219"	.062"	.172"
5	.842"	.252"	.234"	.078"	.125"
6	n/a	.236"	.250"	.094"	.125"
7	n/a	.221"	.266"	.109"	.125"
8	n/a	.205"	.281"	.125"	.125"
9	n/a	.190"	.297"	.140"	.125"

Key Blank	Effective Plug Diameter	Shoulder to First Cut	Root to Root	Depth Increment	Cut Width	MACS
4425, 1175, WK1, WK2	.484"	.218"	.156"	.016"	.080"	5

Disassembly instructions

The Classic can be disassembled with standard pin-tumbler disassembly. The design of the pin-chamber casing facilitates quick disassembly and full rekeying.

1. Remove the cam or C-clip.
2. Insert the key and turn the plug 45-90 degrees.
3. Withdraw the plug from the cylinder. (A plug follower is recommended)

OR

1. Remove the chamber casings and take out each pin-stack individually
2. Remove the cam or C-clip.
3. Withdraw the plug from the cylinder.

Removing cylinders from Weslock knobs

1. Remove the knob from the rose by turning the knob to the extreme

left.

1. Rotate the cylinder plug 180 degrees. Pull the cylinder from the front of the knob.

Vulnerabilities

The Classic may be vulnerable to one or more of the following:

• Lockpicking
• Bumping
• Impressioning
• Decoding

See also

• Weslock
• Pin-tumbler