Testing-mgsecure: Difference between revisions

From Lockwiki
Jump to navigationJump to search
Line 89: Line 89:
|-
|-
|style='text-align:left;'| [[Abloy Protec]] ||7||Pin-tumbler||data-sort-value='b'| ||data-sort-value='a'| YES
|style='text-align:left;'| [[Abloy Protec]] ||7||Pin-tumbler||data-sort-value='b'| ||data-sort-value='a'| YES
|-
|style='text-align:left;'| [[ABUS]] ||6||Pin-tumbler||data-sort-value='b'| ||data-sort-value='b'|
|-
|-
|style='text-align:left;'| [[ABUS 34]] ||4||Pin-tumbler||data-sort-value='b'| ||data-sort-value='a'| YES
|style='text-align:left;'| [[ABUS 34]] ||4||Pin-tumbler||data-sort-value='b'| ||data-sort-value='a'| YES

Revision as of 17:37, 14 December 2022

This page being used for testing and development



Disassembly instructions edit

Original: To disassemble a double euro cylinder, use of a pinning shoe is the preferred method. Other possibility is to use a segmented follower, but that requires that both cores are pulled out a bit to allow a cam removal. Then a core should be rotated to approximately 4:30 or 7:30 o'clock position (135 degrees either clockwise or anti-clockwise) to prevent driver entering a gaps for the cam clutch. Then a segmented follower can be used to remove the core.

Proposed edit: The use of a pinning shoe is the preferred method for disassembling a double euro cylinder. Another method is to use a segmented follower. The c-clips retaining both cores must first be removed and then both cores can be pulled out slightly in order to remove the center cam. One core should be rotated to approximately 4:30 or 7:30 o'clock position -- 135 degrees either clockwise or counter-clockwise -- once the cam is removed. This allows the core to be removed without driver pins entering gaps for the cam clutch. At that point, a segmented follower can be used to remove the core.

Locks not intended for installation and use can be disassembled in a quick but destructive procedure. The cylinder housing itself can be cut in the middle using a hacksaw or grinder. The cam will no longer be held in place and can be removed. The resulting two cut half euro cylinders can then be disassembled as outlined above.


Larger gallery thumbnails (200px)

  • Abloy Classic

  • Abloy Disclock

  • Abloy Easy

  • Abloy Exec

  • Abloy Novel

  • Abloy Profile

  • Abloy Protec

  • ABUS 72

  • ASSA 700

  • ASSA Desmo

  • ASSA Twin 6000

  • ASSA Twin V-10

  • Avocet ABS

  • Baton 40mm

  • BiLock FG

  • CISA C2000

  • CISA C3000

  • Corbin Emhart

  • Defiant

  • DOM DAS


Sortable, formatted table

Belt Make Model Notes
Orange ABUS ABUS 55
Purple Mul-T-Lock Mul-T-Lock Interactive
Brown ASSA ASSA d12 / ASSA P600
Brown Goal Goal D9
Red Goal Goal V18 / Goal GP (< 14 pins)
Black Goal Goal Grand V
Black Goal Goal V18 / Goal GP (≥ 14 pins)
Black Goal Goal Z (<2 standard drivers)

Classification Test

Lock # of Components Component Type Dimple? Padlock?
Abloy Classic 5 Disc-detainer YES
Abloy Disklock 3 Disc-detainer
Abloy Easy 5 Disc-detainer YES
Abloy Exec 7 Disc-detainer
Abloy Novel 7 Pin-tumbler
Abloy Profile 7 Pin-tumbler
Abloy Protec 7 Pin-tumbler YES
ABUS 34 4 Pin-tumbler YES
ABUS 55 6 Pin-tumbler YES
ABUS 64TI 4 Pin-tumbler YES
ABUS 72 7 Pin-tumbler YES
ABUS 75IB 5 Pin-tumbler YES YES
ABUS 80TI 6 Pin-tumbler YES
ABUS 83 4 Pin-tumbler YES
ABUS Diskus 25 7 Pin-tumbler YES
ABUS EC700 3 Pin-tumbler YES
ABUS Plus 88/50 7 Disc-detainer YES
American Lock 1100 1200 1300 5 Pin-tumbler YES
American Lock 5200 3 Pin-tumbler YES
American Lock 747 4 Pin-tumbler YES
Anchor 810-1 6 Pin-tumbler YES

All lock listing

Retrieved from "https://www.lockwiki.com/index.php?title=Testing-mgsecure&oldid=11847"