ASSA Twin 6000: Difference between revisions

From Lockwiki
Jump to navigationJump to search
m (→‎ASSA Twin 6000: added image of gins, update reference patent link)
m (→‎See also: assa category listing)
Line 75: Line 75:
* [[Pin_tumbler|Pin-tumbler]]
* [[Pin_tumbler|Pin-tumbler]]


[[Category:ASSA]]
[[Category:ASSA|Twin 6000]]
[[Category:Lock models]]
[[Category:Lock models]]
[[Category:Pin-tumbler locks]]
[[Category:Pin-tumbler locks]]
[[Category:Sidebar locks]]
[[Category:Sidebar locks]]
[[Category:UL 437 locks]]
[[Category:UL 437 locks]]

Revision as of 02:43, 27 June 2021

ASSA Twin 6000

ASSA Twin 6000
ASSA Twin cylinder.jpg
Name ASSA Twin 6000
Manufacturer ASSA
Lock Type Cylinder
Lock Design Pin-tumbler, Sidebar
Year(s) Produced 1981-present[1]
Patent US 4,393,673
Related Locks
ASSA Twin V-10
ASSA Twin Combi
ASSA Twin Exclusive
ASSA Twin Maximum
ASSA Twin Pro


The Twin (or Twin 6000) is a UL 437-rated pin-tumbler lock made by ASSA. The 6000 is part of the Twin series of locks that use pin-tumblers and a sidebar to provide two layers of security. The 6000 is the original Twin series model. Later systems made by ASSA built upon the 6000 to provide increased security against manipulation and key duplication.

The 6000 has since been superceded by other Twin series models, particularly the ASSA Twin V-10 and ASSA Twin Combi.

Principles of operation

The 6000 uses six pin-tumbler pins and five sidebar finger pins. To open the lock, all pin-tumblers must be aligned at the shear line and all finger pins must be properly aligned with the sidebar legs. Balanced pin stacks are used to resist attack from comb picks as well as reduces wear on the springs. Driver pins come in four sizes and use a modified spool design which is combined with counter-milling in the plug chambers to provide high pick resistance. There are nine depths for pin-tumblers, allowing for 531,441 (96) theoretical key differs for the pin-tumbler portion of the lock. The MACS for this lock is five depths, giving the 6000 around 160,000 real key differs. Master keying is available using traditional pin-tumbler master pins available in eight sizes.

Unlike many other sidebar locks, the Twin 6000 finger pins are identical. Cuts are made on the sidebar directly and finger pins must be raised to match these positions. All finger pins use serrations above and below the true gate to provide manipulation resistance. Rekeying of the sidebar portion of the lock is only possibly when the sidebar is physically replaced or flipped upside-down. This interaction between finger pins and sidebar gates frustrates traditional decoding attacks that attempt to measure the range of movement of the finger pins. There are five depths available for finger pins, giving the Twin 3,125 theoretical sidebar differs (55). There are 2,800 real sidebar differs, using 1400 sidebars that can be flipped in either orientation. Keys blanks are stamped with a three digit indirect sidebar bitting code and sometimes an additional two digit keyway code.

To provide resistance against destructive entry, the 6000 uses hardened steel pins in the front of the plug and near the sidebar and third and fourth pin-stacks. In addition, driver pins are made of stainless steel to frustrate drilling of the pin stacks.

Notes

  • The pin-tumbler bitting code is referred to as the system code, and the sidebar bitting code as the sidebar code.
  • Security pin design is based on a 1942 patent by Ralph Paul Crousore.[2][3]

Disassembly instructions

The 6000 is disassembled in the same way as a traditional pin-tumbler cylinder. The sidebar does not cause too many problems when the plug is removed. When the key is removed from the exposed plug the finger pins will be forced out by spring pressure.

  1. Remove the cam or C-clip.
  2. Insert the key and turn the plug 45-90 degrees.
  3. Withdraw the plug from the cylinder. (A plug follower is recommended)

OR

  1. Remove the chamber casings and take out each pin-stack individually
  2. Remove the cam or C-clip.
  3. Withdraw the plug from the cylinder.


Vulnerabilities

The 6000 system may be vulnerable to one or more of the following:

Notes

  • Bumping is possible given a bump key with the correct sidebar bitting.

Gallery

References

  1. The History of ASSA High-Security Locks
  2. US #2,283,489. Pin and Cylinder Lock.
  3. PULFORD, Graham (2007). High Security Mechanical Locks: An Encyclopedic Reference. ISBN 0750684372.

See also