ASSA d12: Difference between revisions
From Lockwiki
Jump to navigationJump to search
mNo edit summary |
|||
| Line 20: | Line 20: | ||
== Disassembly instructions == | == Disassembly instructions == | ||
Due to the atypical construction of this lock, disassembly using a follower is not recommended. | |||
# Remove the Torx screw on the tailpiece and the wafer beneath it. | |||
# Unscrew the retaining cap on the rear of the plug. | |||
# Unscrew and remove the closing rod over the pin chambers (be careful not to allow springs to escape). | |||
# Remove the driver pins and springs. They are all the same so there is no need to keep them in order. Key pins cannot fit through the top chambers. | |||
# Slide the plug out of the housing. | |||
== Vulnerabilities == | == Vulnerabilities == | ||
Revision as of 18:32, 17 March 2019
ASSA d12
| ASSA d12 | |
 | |
| Name | ASSA d12 |
|---|---|
| Manufacturer | ASSA-Abloy |
| Lock Type | Cylinder |
| Lock Design | Pin-tumbler |
The d12 is a medium security pin tumbler made by ASSA for residential or commercial use. It is intended as a successor to the ASSA 700 series which dates back to 1948. It features six pins and numerous security improvements over the original cylinder, including a paracentric keyway and patented key profiles.
Principles of operation
Add to me!
Disassembly instructions
Due to the atypical construction of this lock, disassembly using a follower is not recommended.
- Remove the Torx screw on the tailpiece and the wafer beneath it.
- Unscrew the retaining cap on the rear of the plug.
- Unscrew and remove the closing rod over the pin chambers (be careful not to allow springs to escape).
- Remove the driver pins and springs. They are all the same so there is no need to keep them in order. Key pins cannot fit through the top chambers.
- Slide the plug out of the housing.
Vulnerabilities
The ASSA d12 may be vulnerable to one or more of the following:
Gallery
Scandinavian profile ASSA d12 (front).
Scandinavian profile ASSA d12 (back).
Level 1 d12 key. Bo Widén and d12 logo on right side of bow.
References
External links
- Paper by Han Fey on ASSA d12
- ASSA d12 product page (Swedish)
- Differences between ASSA 700 and ASSA d12
