User:Mgsecure: Difference between revisions
m (→Change Log) |
m (Move testing content to user page.) |
||
| Line 8: | Line 8: | ||
== Testing == | == Testing == | ||
=== [[Lock index]] === | === [[Lock index]] === | ||
=== Disassembly instructions edit === | |||
''Original:'' To disassemble a double euro cylinder, use of a pinning shoe is the preferred method. Other possibility is to use a segmented follower, but that requires that both cores are pulled out a bit to allow a cam removal. Then a core should be rotated to approximately 4:30 or 7:30 o'clock position (135 degrees either clockwise or anti-clockwise) to prevent driver entering a gaps for the cam clutch. Then a segmented follower can be used to remove the core. | |||
''Proposed edit:'' | |||
'''For [[Euro Profile]] page:''' | |||
The use of a [[pinning shoe]] is the preferred method for disassembling a double euro cylinder. STEPS? | |||
Another method is to use a [[Plug follower|segmented follower]]. The c-clips retaining both cores must first be removed and then both cores can be pulled out slightly in order to remove the center cam. One core should be rotated 30-45 degrees either clockwise or counter-clockwise -- once the cam is removed. This allows the core to be removed without driver pins entering gaps for the cam clutch. At that point, a segmented follower can be used to remove the core. | |||
Locks not intended for installation and use can be disassembled in a quick but destructive procedure. The cylinder housing itself can be cut in the middle using a hacksaw or grinder. The cam will no longer be held in place and can be removed. The resulting two cut half euro cylinders can then be disassembled as outlined above. | |||
'''For individual lock page:''' | |||
TBD | |||
== Recent contribs == | == Recent contribs == | ||
Revision as of 13:30, 11 February 2023
Mgsecure
Testing
Lock index
Disassembly instructions edit
Original: To disassemble a double euro cylinder, use of a pinning shoe is the preferred method. Other possibility is to use a segmented follower, but that requires that both cores are pulled out a bit to allow a cam removal. Then a core should be rotated to approximately 4:30 or 7:30 o'clock position (135 degrees either clockwise or anti-clockwise) to prevent driver entering a gaps for the cam clutch. Then a segmented follower can be used to remove the core.
Proposed edit:
For Euro Profile page:
The use of a pinning shoe is the preferred method for disassembling a double euro cylinder. STEPS?
Another method is to use a segmented follower. The c-clips retaining both cores must first be removed and then both cores can be pulled out slightly in order to remove the center cam. One core should be rotated 30-45 degrees either clockwise or counter-clockwise -- once the cam is removed. This allows the core to be removed without driver pins entering gaps for the cam clutch. At that point, a segmented follower can be used to remove the core.
Locks not intended for installation and use can be disassembled in a quick but destructive procedure. The cylinder housing itself can be cut in the middle using a hacksaw or grinder. The cam will no longer be held in place and can be removed. The resulting two cut half euro cylinders can then be disassembled as outlined above.
For individual lock page:
TBD
Recent contribs
- ALPHA FB
- MIWA JN
- Goal D9
- Goal V18
- WEST 916
- WEST 917
- IKON WSW
- Mul-T-Lock Junior
- ABUS EC700
- Kale Kilit 164 BNE
- S&G 6730
- Yardeni 6
- Lock classification index
- Belt ranking
- Keyway gallery (photos)
- Security pin (illustrations and photos)
- Dimple (photos)
Image Uploads
MIWA JN
MIWA JN lock cylinders
Front, keyway
Four pin axes
Side row pins
Core, side view
Key
Key
Dimple cuts
Side row pin
Diagonal row pin
ABUS 72/40
Keyway gallery
Mul-T-Lock Interactive
Kaba experT keyway
Kaba 8 cam lock keyway
Kaba 8 cam lock keyway 2
Goal V18-05 front, glow-in-the-dark, lit
Goal V18-05 front, glow-in-the-dark, glowing
Kale Kilit 164 BNE - keyway
WEST 917 housing keyway
WEST 916 front view keyway
Goal V18 housing keyway
Goal D9 keyway 02
IKON WSW keyway
IKON WSW
WSW keyway
Cylinder and key
WSW components full
Pin-tumblers
Sliders
Sidebar
Core top view
Core side view
S&G 6730
S&G 6730 components
S&G 6730 dial
S&G 6730 back
S&G 6730 back open
S&G 6730 wheel pack
S&G 6730 internal components
S&G 6700 dial
S&G 6700 spy-proof dial
GOAL D9
GOAL D9 keyway 01
GOAL D9 keyway 02
GOAL D9 small cylinder
GOAL D9 key
GOAL V18-D9 size compare
GOAL D9 cylinder & key
GOAL D9 cylinder, front view
GOAL D9 cylinder, side view
GOAL D9 key and dimple closeup
GOAL D9 key
GOAL D9 pins (single row)
GOAL D9 pins (all three rows)
GOAL D9 core overmilling
GOAL D9 core, drilled for construction keying
GOAL D9 size compared to 1 1/4" mortise lock
GOAL V18
GOAL V18 housing front
GOAL V18 rim cylinder front
GOAL V18 rim cylinder top
GOAL V18 rim cylinder back
GOAL V18 drill protection
GOAL V18 small cylinder
GOAL V18 key
GOAL V18-D9 size compare
GOAL V18 housing keyway
GOAL V18 cylinder keyway
Side pins
Top pins
Goal V18 rim v compact cylinders
Goal V18 pin sizes
Goal V18 core
Goal V18 core with bearing
Goal V18 pin stack variations
Goal V18 ward pins
Goal V18-03 all pins
Goal V18-05 front, glow-in-the-dark
WEST 916
WEST 916 front view keyway
WEST 916 front view
WEST 916 cylinder top view
WEST 916 cylinder side view
WEST 916 key
WEST 916 pins (one side)
WEST 916, all four pin sizes
WEST 916 & 917 key comparison
WEST 917
WEST 917 housing keyway
West 917 key with dimple cuts
Cylinder front view
Three rows of pins in 917 core
Driver, top, and side pin sizes
Full set of pins
Full set of pins & springs
Core side view + indent for core centering
Core top view + construction key drilling
917 core with chamber overmilling
Cylinder top + bible cover
Cylinder front
Cylinder top
917 key
West 916 & 917 key comparison
Padlocks & their keyways
ABUS 55/40
ABUS 55/40 keyway
ABUS 64TI/50
ABUS 64TI/50 keyway
ABUS 71/40 LOTO keyway
ABUS 72/40
ABUS 72/40 keyway
ABUS 75IB/40
ABUS 75IB/40 back
ABUS 75IB/40 keyway
ABUS 75IB/50
ABUS 75IB/50 back
ABUS 75IB/50 keyway
ABUS 75IB/50 + key
ABUS 80TI/50
ABUS 80TI/50 keyway
American Lock 1100, blue
American Lock 1100, blue, back
American Lock 1100, red
American Lock 1100, red, back
American Lock 1100, red, keyway
American Lock 5200
American Lock 5200 keyway
American Lock 5200, back
Clear acrylic practice lock
Clear acrylic practice lock keyway
Master Lock #3
Master Lock #3 keyway
Master Lock 140
Master Lock 140 keyway
Master Lock 141
Master Lock 141 keyway
Master Lock No 142 keyway
Master Lock No 142 & key
Master Lock 150
Master Lock 150 keyway
Master Lock 410 LOTO, orange
Master Lock 410 LOTO, orange, keyway
Master Lock 410 LOTO, red
Master Lock 410 LOTO, red, keyway
PACLOCK 90A
PACLOCK 90A keyway
Wilson Bohannon padlock
Wilson Bohannon padlock keyway
Security pin illustrations
Spool Security Pin
Serrated Security Pin
"Spoorated" Security Pin
Double-Spool Security Pin
Mushroom Security Pin
Tapered Security Pin
Trampoline Security Pin
Barrel Security Pin
Barrel-Spool Security Pin
T-Pin Security Pin
"Drunken-Spool" Security Pin
Gin-Bottle-Spool Security Pin
Spool Security Key Pin
Serrated Security Key Pin
Torpedo Security Key Pin
Miscellaneous
Souber Tools flags for Mul-T-Lock
Varitations of Offset Diamond Lockpicks
Dimple cuts in a WEST 917 key
Dimple cuts in a Kaba experT key with dimple cuts
Dimple cuts in a Goal D9 key
Pins for a dimple key in core of the WEST 917
Vertical dimple keyway of the WEST 917
Horizontal dimple keyway of the Mul-T-Lock Jr.
HUK follower set
Keedex EZ-Load follower
Segmented follower
Improvised followers
Abus EC700 euro cylinder
ABUS EC700 key
ABUS EC700 cut euro cylinder
Common lock cylinder types
Euro profile cylinder side view
Telescoping pins from the Mul-T-Lock Interactive
Serrated telescoping pins
La Gard 1985, Lock mechanism
La Gard 1985, Back cover
La Gard 1985, Lock info
La Gard 1985, With top-reading dial
La Gard 1985, Mounting hardware and change key
Mul-T-Lock Interactive key
Mul-T-Lock Interactive pins
Yardeni 6, front view
Yardeni 6, pins
Yardeni 6, components
Yardeni 6, key
DeGuard Dimple Lock, front view
DeGuard Dimple Lock, pins (1" cylinder)
DeGuard Dimple Lock, key
DeGuard Dimple Lock, motise cylinder lengths and key counts
Wilson Bohannon padlock, bottom view
S&G 8400 series wheel pack (brass wheels)
Telescoping pins from a challenge lock
WSW keyway
WSW cylinder and key
Kale Kilit 164 BNE - keyway
Kale Kilit 164 BNE - front
Kale Kilit 164 BNE - key
Kale Kilit 164 BNE - pins
Kale Kilit 164 BNE - cut euro cylinder
Security pins from Mul-T-Lock Interactive, Schlage residential cylinder, and Goal V18
Security card, Angal
Security card, DeGuard Dimple Lock
Security card, Mul-T-Lock Junior
Security card, Yardeni 6
Change Log
02.03.2023
New page
01.30.2023
New page
01.26.2023
New pages
01.13.2023
New stub pages
01.12.2023
- add photos from Reinder S.
01.11.2023
- separate page for lock classification table, format & data tweaks
- full content update
01.10.2023
- Added descriptions & photos of pinning shoe, sore shims
01.06.2023
Photos:
01.05.2023
- major content additions
01.04.2023
- S&G 6730 create new page with gallery
01.03.2023
- DeGuard Interactive add detailed content
01.01.2023
- HOBES 02-03 stub page with gallery
- HOBES 24129 stub page with gallery
12.30.2022
- Add content
12.29.2022
- Add images
12.24.2022
- Create new page for lock
- Updates and (partial) automation
12.20.2022
- created new page for LPU belt system
12.19.2022
- Update content and links, reflect merger with Eberhard
- content re-org and general cleanup
12.15.2022
- Proof of Concept
12.12.2022
Create page for high pin count locksAdd section to High Security Locks
12.11.2022
- Add gallery of photos
- Add gallery of photos
12.09.2022
- Content update with more complete info
- New photos and gallery reorg
12.08.2022
- Clean up list of pick makers
12.07.2022
- Add gallery of Security Pin illustrations
- Create stub page for Czech lever lock manufacturer
12.06.2022
- Fundamental cleanup work, Section numbering, etc.
- Added image for first of the figures (2.1)
12.05.2022
- Added image gallery
12.02.2022
- add disassembly instructions
- replace sidebar image
12.01.2022
- ABUS EC700 - new page with feature image & gallery
11.30.2022
11.28.2022
Dimple Locks
11.25.2022
- upload cropped images for use on Keyway gallery page
11.23.2022
Padlocks & keyways - uploaded a batch of images, see also Category:Padlocks
- ABUS 55 - add photos
- ABUS 64TI - new page with gallery
- ABUS 72 - add gallery
- ABUS 75IB - new page with gallery
- ABUS 80TI - new page with gallery
- American Lock 1100 - add new photos
- American Lock 5200 - add keyway photo
- Master Lock No 3 - new page with gallery
- Master Lock No 140 - add/move photos to gallery
- Master Lock No 141 - add gallery
- Master Lock No 150 - new page with gallery
- Master Lock No 410 - add gallery
- PACLOCK 90A - new page with gallery
- add keyway photo to Gallery
- Kale Kilit 164 BNE - new page with gallery
11.18.2022
- new photos and content refinement to the Goal V18
11.16.2022
- Additional content refinement to the Goal V18
- added additional cards with links
- tagged existing images for category
11.14.2022
- Major content additions to the Goal V18
11.12.2022
- replace pin images for the Goal V18
- add WSW images to main gallery
11.11.2022
11.10.2022
- uploaded images of the Goal V18 for consideration
- new images of the Goal D9
- uploaded images for possible use on the Keyway gallery
11.08.2022
- Updated empty page with standard content sections, minimal content, company logo
- Added missing logo
- Added missing logo
- uploaded images for possible use
11.05.2022
- added note about lock models/sizes
- fixed links in references, etc
- added patent expiration dates for Mul-T-Lock platforms
11.04.2022
- fixed formatting
- made table sortable
11.03.2022
- Added History (with reference to MTL history page)
- Added Principles of Operaton
- Added challenge lock PIP to gallery
- Added redirect from Pin-in-pin
- updated logo
- added "IKON" lock names
- added info and reference to History section
- updated logo (ASSA-Abloy)
10.31.2022
- Added company logo
- Added "PACLOCK" to lock model names
10.24.2022
- updated logo
- added Rotasera to lock listing
10.23.2022
- created manufacturer page
- added info to history section
- separated PR and U9 into separate entries in lock listing
10.22.2022
- Added gallery with photos
- added photo to gallery
- added captions for all photos
10.21.2022
- DeGuard - Created new page for manufacturer
- DeGuard Dimple Lock - new page for MTL clone
- Lock_manufacturer - Added DeGuard
- De Guard - (with space) redirect to DeGuard
- Master_Lock_No_141 - added missing lock photo
- Master_Lock_No_140 - updated lock photo
- American Lock 5200 - added front/back views to gallery
10.20.2022
- Yardeni - Created new page for manufacturer
- Lock manufacturer - Added Yardeni
- Yardeni 6 - new page for lock model
- Mul-T-Lock Interactive - added photos of key & pins
- MTL - created redirect to Mul-T-Lock
- La Gard 1985 - new page for lock model
- La Gard - Added model 1985
10.19.2022
tweaked color balance of images- added photos of pins
Telescoping pin - added photos of pins from MTL Interactive, Angal
KESO - added lock listing
10.18.2022
Goal and Goal Den International
Goal brand locks were incorrectly associated with the brand Goal Den International. Created page for Goal, added & updated lock pages:
- Goal Den International - removed links to "Goal" brand locks
Kale Kilit - updated logo
La Gard - Added model 3330
Mul-T-Lock - added Mul-T-Lock Junior, alphabetized lock list
